AxleTable

TIRE SIZE COMPARISON · ETRTO GEOMETRY

245/40 R18 vs 245/35 R19

Direct Answer: Switching from 245/40 R18 to 245/35 R19 changes overall diameter by +0.14% (+0.9 mm) and ground clearance by +0.4 mm. At an indicated 100 km/h (60 mph), your actual speed is 100.1 km/h (60.1 mph). Exact +1 inch performance wheel swap with virtually zero circumference change (+0.1%).
Metric245/40 R18245/35 R19Delta
Section Width245 mm245 mm+0 mm
Sidewall Height98.0 mm (3.86")85.8 mm (3.38")-12.2 mm
Overall Diameter653.2 mm (25.72")654.1 mm (25.75")+0.9 mm (+0.14%)
Ground Clearance326.6 mm327.0 mm+0.4 mm
Circumference2052 mm2055 mm+3 mm
Revolutions / km487.3486.6-0.7
Speedo at 100 km/h100.0 km/h100.1 km/h+0.1 km/h
ETRTO Rim Width (J)6.5–8.5J (7.5J)6.5–8.5J (7.5J)8.5J → 8.5J
Inner Strut ClearanceET40ET40+0.0 mm
Outer Fender Poke8.5J8.5J+0.0 mm

Engineering Fitment & Regulatory Analysis (245/40 R18 → 245/35 R19)

Under ETRTO geometric standards, 245/40 R18 has a section width of 245 mm, a sidewall height of 98.0 mm (3.86"), and an overall rolling diameter of 653.2 mm (25.72"). Moving to 245/35 R19 alters section width by +0 mm, sidewall height by -12.2 mm, and rolling circumference from 2052 mm (487.3 revs/km) to 2055 mm (486.6 revs/km).

Rim Width & Clearance: ETRTO approves 6.5J–8.5J rims (ideal 7.5J) for 245/40 R18, and 6.5J–8.5J rims (ideal 7.5J) for 245/35 R19.Comparing 8.5J ET40 against 8.5J ET40 shifts inner suspension strut clearance by +0.0 mm and outer fender arch position by +0.0 mm. This setup falls within the European ECE-R39 / German StVZO §57 speedometer window (−4.0% to +1.5%) without mandatory speedometer recalibration.