TIRE SIZE COMPARISON · ETRTO GEOMETRY
245/75 R16 vs 265/75 R16
| Metric | 245/75 R16 | 265/75 R16 | Delta |
|---|---|---|---|
| Section Width | 245 mm | 265 mm | +20 mm |
| Sidewall Height | 183.8 mm (7.23") | 198.8 mm (7.82") | +15.0 mm |
| Overall Diameter | 773.9 mm (30.47") | 803.9 mm (31.65") | +30.0 mm (+3.88%) |
| Ground Clearance | 386.9 mm | 401.9 mm | +15.0 mm |
| Circumference | 2431 mm | 2526 mm | +94 mm |
| Revolutions / km | 411.3 | 396.0 | -15.3 |
| Speedo at 100 km/h | 100.0 km/h | 103.9 km/h | +3.9 km/h |
| ETRTO Rim Width (J) | 6.5–8.5J (7.5J) | 7.5–9.5J (8.5J) | 7.0J → 7.5J |
| Inner Strut Clearance | ET30 | ET30 | -10.0 mm |
| Outer Fender Poke | 7.0J | 7.5J | +10.0 mm |
Engineering Fitment & Regulatory Analysis (245/75 R16 → 265/75 R16)
Under ETRTO geometric standards, 245/75 R16 has a section width of 245 mm, a sidewall height of 183.8 mm (7.23"), and an overall rolling diameter of 773.9 mm (30.47"). Moving to 265/75 R16 alters section width by +20 mm, sidewall height by +15.0 mm, and rolling circumference from 2431 mm (411.3 revs/km) to 2526 mm (396.0 revs/km).
Rim Width & Clearance: ETRTO approves 6.5J–8.5J rims (ideal 7.5J) for 245/75 R16, and 7.5J–9.5J rims (ideal 8.5J) for 265/75 R16.Comparing 7.0J ET30 against 7.5J ET30 shifts inner suspension strut clearance by -10.0 mm and outer fender arch position by +10.0 mm. Because diameter change exceeds the standard −4.0% to +1.5% European ECE-R39 / StVZO §57 threshold, speedometer verification and fender clearance inspection are required.