TIRE SIZE COMPARISON · ETRTO GEOMETRY
275/55 R20 vs 275/60 R20
| Metric | 275/55 R20 | 275/60 R20 | Delta |
|---|---|---|---|
| Section Width | 275 mm | 275 mm | +0 mm |
| Sidewall Height | 151.2 mm (5.95") | 165.0 mm (6.50") | +13.8 mm |
| Overall Diameter | 810.5 mm (31.91") | 838.0 mm (32.99") | +27.5 mm (+3.39%) |
| Ground Clearance | 405.2 mm | 419.0 mm | +13.8 mm |
| Circumference | 2546 mm | 2633 mm | +86 mm |
| Revolutions / km | 392.7 | 379.8 | -12.9 |
| Speedo at 100 km/h | 100.0 km/h | 103.4 km/h | +3.4 km/h |
| ETRTO Rim Width (J) | 7.5–9.5J (8.5J) | 7.5–9.5J (8.5J) | 9.0J → 9.0J |
| Inner Strut Clearance | ET25 | ET25 | +0.0 mm |
| Outer Fender Poke | 9.0J | 9.0J | +0.0 mm |
Engineering Fitment & Regulatory Analysis (275/55 R20 → 275/60 R20)
Under ETRTO geometric standards, 275/55 R20 has a section width of 275 mm, a sidewall height of 151.2 mm (5.95"), and an overall rolling diameter of 810.5 mm (31.91"). Moving to 275/60 R20 alters section width by +0 mm, sidewall height by +13.8 mm, and rolling circumference from 2546 mm (392.7 revs/km) to 2633 mm (379.8 revs/km).
Rim Width & Clearance: ETRTO approves 7.5J–9.5J rims (ideal 8.5J) for 275/55 R20, and 7.5J–9.5J rims (ideal 8.5J) for 275/60 R20.Comparing 9.0J ET25 against 9.0J ET25 shifts inner suspension strut clearance by +0.0 mm and outer fender arch position by +0.0 mm. Because diameter change exceeds the standard −4.0% to +1.5% European ECE-R39 / StVZO §57 threshold, speedometer verification and fender clearance inspection are required.