OEM WHEEL & TORQUE SPECIFICATION · SOURCE: RAM 1500 (DT) OWNER'S MANUAL (130 LB-FT)
RAM 1500 (DT) (2019–2026)
OEM wheel fitment for RAM 1500 (DT) (2019–2026): PCD 6x139.7, Center Bore 77.8 mm, Lug Torque 176 Nm (130 ft-lbs), stock tire 275/65 R18.
| Bolt Pattern (PCD) | 6x139.7 |
| Center Bore (CB) | 77.8 mm |
| Thread Size & Seat | M14x1.5 · Cone 60° |
| Lug Nut / Bolt Torque | 176 Nm (130 ft-lbs) |
| OEM Tire & Rim | 275/65 R18 (8.0J ET19 · Ø 814.7 mm) |
| Alternative OEM Size | 275/55 R20 (9.0J ET19 · Ø 810.5 mm / -0.52%) |
| Cold Tire Pressure | 2.5 bar / 36 PSI |
| Reference Source | RAM 1500 (DT) Owner's Manual (130 lb-ft) |
Wheel Mounting, Hub-Centric & Torque Notes for RAM 1500 (DT)
The RAM 1500 (DT) (2019–2026) uses a 6x139.7 bolt pattern with a 77.8 mm hub center bore and M14x1.5 (Cone 60°) wheel fasteners. When installing aftermarket alloy wheels with a larger universal center bore (such as 72.6 mm or 73.1 mm), always install → 77.8 mm hub-centric rings to prevent high-speed vibration, and verify whether the aftermarket wheels require 60° conical bolts/nuts instead of the factory Cone 60° profile.
Lug Torque Procedure: Hand-thread fasteners and torque in a criss-cross star sequence to 176 Nm (130 ft-lbs) on clean, dry threads (never apply grease or anti-seize to threads). Re-verify torque after 50–100 km (30–60 miles). Stock rolling diameter is 814.7 mm (275/65 R18 on 8.0J ET19); the factory alternative 275/55 R20 (9.0J ET19) sits at 810.5 mm (-0.52%).