OEM WHEEL & TORQUE SPECIFICATION · SOURCE: TESLA MODEL 3 (HIGHLAND) OWNER'S MANUAL
Tesla Model 3 (Highland) (2024–2026)
OEM wheel fitment for Tesla Model 3 (Highland) (2024–2026): PCD 5x114.3, Center Bore 64.1 mm, Lug Torque 175 Nm (129 ft-lbs), stock tire 235/45 R18.
| Bolt Pattern (PCD) | 5x114.3 |
| Center Bore (CB) | 64.1 mm |
| Thread Size & Seat | M14x1.5 · Cone 60° |
| Lug Nut / Bolt Torque | 175 Nm (129 ft-lbs) |
| OEM Tire & Rim | 235/45 R18 (8.5J ET38 · Ø 668.7 mm) |
| Alternative OEM Size | 235/40 R19 (8.5J ET38 · Ø 670.6 mm / +0.28%) |
| Cold Tire Pressure | 2.9 bar / 42 PSI |
| Reference Source | Tesla Model 3 (Highland) Owner's Manual |
Wheel Mounting, Hub-Centric & Torque Notes for Tesla Model 3 (Highland)
The Tesla Model 3 (Highland) (2024–2026) uses a 5x114.3 bolt pattern with a 64.1 mm hub center bore and M14x1.5 (Cone 60°) wheel fasteners. When installing aftermarket alloy wheels with a larger universal center bore (such as 72.6 mm or 73.1 mm), always install → 64.1 mm hub-centric rings to prevent high-speed vibration, and verify whether the aftermarket wheels require 60° conical bolts/nuts instead of the factory Cone 60° profile.
Lug Torque Procedure: Hand-thread fasteners and torque in a criss-cross star sequence to 175 Nm (129 ft-lbs) on clean, dry threads (never apply grease or anti-seize to threads). Re-verify torque after 50–100 km (30–60 miles). Stock rolling diameter is 668.7 mm (235/45 R18 on 8.5J ET38); the factory alternative 235/40 R19 (8.5J ET38) sits at 670.6 mm (+0.28%).