AxleTable

OEM WHEEL & TORQUE SPECIFICATION · SOURCE: HYUNDAI IONIQ 5 2025 FACELIFT SPEC SHEET

Hyundai IONIQ 5 (84 kWh) (2025–2026)

OEM wheel fitment for Hyundai IONIQ 5 (84 kWh) (2025–2026): PCD 5x114.3, Center Bore 67.1 mm, Lug Torque 120 Nm (89 ft-lbs), stock tire 235/55 R19.

Bolt Pattern (PCD)5x114.3
Center Bore (CB)67.1 mm
Thread Size & SeatM12x1.5 · Cone 60°
Lug Nut / Bolt Torque120 Nm (89 ft-lbs)
OEM Tire & Rim235/55 R19 (7.5J ET49.5 · Ø 741.1 mm)
Alternative OEM Size255/45 R20 (8.5J ET54.5 · Ø 737.5 mm / -0.49%)
Cold Tire Pressure2.5 bar / 36 PSI
Reference SourceHyundai IONIQ 5 2025 Facelift Spec Sheet

Wheel Mounting, Hub-Centric & Torque Notes for Hyundai IONIQ 5 (84 kWh)

The Hyundai IONIQ 5 (84 kWh) (2025–2026) uses a 5x114.3 bolt pattern with a 67.1 mm hub center bore and M12x1.5 (Cone 60°) wheel fasteners. When installing aftermarket alloy wheels with a larger universal center bore (such as 72.6 mm or 73.1 mm), always install → 67.1 mm hub-centric rings to prevent high-speed vibration, and verify whether the aftermarket wheels require 60° conical bolts/nuts instead of the factory Cone 60° profile.

Lug Torque Procedure: Hand-thread fasteners and torque in a criss-cross star sequence to 120 Nm (89 ft-lbs) on clean, dry threads (never apply grease or anti-seize to threads). Re-verify torque after 50–100 km (30–60 miles). Stock rolling diameter is 741.1 mm (235/55 R19 on 7.5J ET49.5); the factory alternative 255/45 R20 (8.5J ET54.5) sits at 737.5 mm (-0.49%).