AxleTable

OEM WHEEL & TORQUE SPECIFICATION · SOURCE: TESLA MODEL Y OWNER'S MANUAL (175 NM LUG SPEC)

Tesla Model Y (Juniper) (2025–2026)

OEM wheel fitment for Tesla Model Y (Juniper) (2025–2026): PCD 5x114.3, Center Bore 64.1 mm, Lug Torque 175 Nm (129 ft-lbs), stock tire 255/45 R19.

Bolt Pattern (PCD)5x114.3
Center Bore (CB)64.1 mm
Thread Size & SeatM14x1.5 · Cone 60°
Lug Nut / Bolt Torque175 Nm (129 ft-lbs)
OEM Tire & Rim255/45 R19 (9.5J ET45 · Ø 712.1 mm)
Alternative OEM Size255/40 R20 (9.5J ET45 · Ø 712.0 mm / -0.01%)
Cold Tire Pressure2.9 bar / 42 PSI
Reference SourceTesla Model Y Owner's Manual (175 Nm lug spec)

Wheel Mounting, Hub-Centric & Torque Notes for Tesla Model Y (Juniper)

The Tesla Model Y (Juniper) (2025–2026) uses a 5x114.3 bolt pattern with a 64.1 mm hub center bore and M14x1.5 (Cone 60°) wheel fasteners. When installing aftermarket alloy wheels with a larger universal center bore (such as 72.6 mm or 73.1 mm), always install → 64.1 mm hub-centric rings to prevent high-speed vibration, and verify whether the aftermarket wheels require 60° conical bolts/nuts instead of the factory Cone 60° profile.

Lug Torque Procedure: Hand-thread fasteners and torque in a criss-cross star sequence to 175 Nm (129 ft-lbs) on clean, dry threads (never apply grease or anti-seize to threads). Re-verify torque after 50–100 km (30–60 miles). Stock rolling diameter is 712.1 mm (255/45 R19 on 9.5J ET45); the factory alternative 255/40 R20 (9.5J ET45) sits at 712.0 mm (-0.01%).