OEM WHEEL & TORQUE SPECIFICATION · SOURCE: SKODA ENYAQ IV / 85 OWNER'S MANUAL
Skoda Enyaq 85 (2024–2026)
OEM wheel fitment for Skoda Enyaq 85 (2024–2026): PCD 5x112, Center Bore 57.1 mm, Lug Torque 120 Nm (89 ft-lbs), stock tire 235/55 R19.
| Bolt Pattern (PCD) | 5x112 |
| Center Bore (CB) | 57.1 mm |
| Thread Size & Seat | M14x1.5 · Ball R13 (OEM) |
| Lug Nut / Bolt Torque | 120 Nm (89 ft-lbs) |
| OEM Tire & Rim | 235/55 R19 (8.0J ET45 · Ø 741.1 mm) |
| Alternative OEM Size | 235/45 R21 (8.5J ET40 · Ø 744.9 mm / +0.51%) |
| Cold Tire Pressure | 2.5 bar / 36 PSI |
| Reference Source | Skoda Enyaq iV / 85 Owner's Manual |
Wheel Mounting, Hub-Centric & Torque Notes for Skoda Enyaq 85
The Skoda Enyaq 85 (2024–2026) uses a 5x112 bolt pattern with a 57.1 mm hub center bore and M14x1.5 (Ball R13 (OEM)) wheel fasteners. When installing aftermarket alloy wheels with a larger universal center bore (such as 72.6 mm or 73.1 mm), always install → 57.1 mm hub-centric rings to prevent high-speed vibration, and verify whether the aftermarket wheels require 60° conical bolts/nuts instead of the factory Ball R13 (OEM) profile.
Lug Torque Procedure: Hand-thread fasteners and torque in a criss-cross star sequence to 120 Nm (89 ft-lbs) on clean, dry threads (never apply grease or anti-seize to threads). Re-verify torque after 50–100 km (30–60 miles). Stock rolling diameter is 741.1 mm (235/55 R19 on 8.0J ET45); the factory alternative 235/45 R21 (8.5J ET40) sits at 744.9 mm (+0.51%).