AxleTable

OEM WHEEL & TORQUE SPECIFICATION · SOURCE: BMW G20/G21 WHEEL & TIRE HOMOLOGATION SPEC

BMW 3 Series (G20) (2019–2026)

OEM wheel fitment for BMW 3 Series (G20) (2019–2026): PCD 5x112, Center Bore 66.6 mm, Lug Torque 140 Nm (103 ft-lbs), stock tire 225/50 R17.

Bolt Pattern (PCD)5x112
Center Bore (CB)66.6 mm
Thread Size & SeatM14x1.25 · Cone 60°
Lug Nut / Bolt Torque140 Nm (103 ft-lbs)
OEM Tire & Rim225/50 R17 (7.5J ET30 · Ø 656.8 mm)
Alternative OEM Size225/45 R18 (7.5J ET25 · Ø 659.7 mm / +0.44%)
Cold Tire Pressure2.4 bar / 35 PSI
Reference SourceBMW G20/G21 Wheel & Tire Homologation Spec

Wheel Mounting, Hub-Centric & Torque Notes for BMW 3 Series (G20)

The BMW 3 Series (G20) (2019–2026) uses a 5x112 bolt pattern with a 66.6 mm hub center bore and M14x1.25 (Cone 60°) wheel fasteners. When installing aftermarket alloy wheels with a larger universal center bore (such as 72.6 mm or 73.1 mm), always install → 66.6 mm hub-centric rings to prevent high-speed vibration, and verify whether the aftermarket wheels require 60° conical bolts/nuts instead of the factory Cone 60° profile.

Lug Torque Procedure: Hand-thread fasteners and torque in a criss-cross star sequence to 140 Nm (103 ft-lbs) on clean, dry threads (never apply grease or anti-seize to threads). Re-verify torque after 50–100 km (30–60 miles). Stock rolling diameter is 656.8 mm (225/50 R17 on 7.5J ET30); the factory alternative 225/45 R18 (7.5J ET25) sits at 659.7 mm (+0.44%).