TIRE SIZE COMPARISON · ETRTO GEOMETRY
255/45 R19 vs 255/40 R20
| Metric | 255/45 R19 | 255/40 R20 | Delta |
|---|---|---|---|
| Section Width | 255 mm | 255 mm | +0 mm |
| Sidewall Height | 114.8 mm (4.52") | 102.0 mm (4.02") | -12.8 mm |
| Overall Diameter | 712.1 mm (28.04") | 712.0 mm (28.03") | -0.1 mm (-0.01%) |
| Ground Clearance | 356.0 mm | 356.0 mm | -0.0 mm |
| Circumference | 2237 mm | 2237 mm | -0 mm |
| Revolutions / km | 447.0 | 447.1 | +0.1 |
| Speedo at 100 km/h | 100.0 km/h | 100.0 km/h | -0.0 km/h |
| ETRTO Rim Width (J) | 7.0–9.0J (8.0J) | 7.0–9.0J (8.0J) | 9.5J → 9.5J |
| Inner Strut Clearance | ET45 | ET45 | +0.0 mm |
| Outer Fender Poke | 9.5J | 9.5J | +0.0 mm |
Engineering Fitment & Regulatory Analysis (255/45 R19 → 255/40 R20)
Under ETRTO geometric standards, 255/45 R19 has a section width of 255 mm, a sidewall height of 114.8 mm (4.52"), and an overall rolling diameter of 712.1 mm (28.04"). Moving to 255/40 R20 alters section width by +0 mm, sidewall height by -12.8 mm, and rolling circumference from 2237 mm (447.0 revs/km) to 2237 mm (447.1 revs/km).
Rim Width & Clearance: ETRTO approves 7.0J–9.0J rims (ideal 8.0J) for 255/45 R19, and 7.0J–9.0J rims (ideal 8.0J) for 255/40 R20.Comparing 9.5J ET45 against 9.5J ET45 shifts inner suspension strut clearance by +0.0 mm and outer fender arch position by +0.0 mm. This setup falls within the European ECE-R39 / German StVZO §57 speedometer window (−4.0% to +1.5%) without mandatory speedometer recalibration.