TIRE SIZE COMPARISON · ETRTO GEOMETRY
235/55 R19 vs 255/45 R20
| Metric | 235/55 R19 | 255/45 R20 | Delta |
|---|---|---|---|
| Section Width | 235 mm | 255 mm | +20 mm |
| Sidewall Height | 129.2 mm (5.09") | 114.8 mm (4.52") | -14.5 mm |
| Overall Diameter | 741.1 mm (29.18") | 737.5 mm (29.04") | -3.6 mm (-0.49%) |
| Ground Clearance | 370.5 mm | 368.8 mm | -1.8 mm |
| Circumference | 2328 mm | 2317 mm | -11 mm |
| Revolutions / km | 429.5 | 431.6 | +2.1 |
| Speedo at 100 km/h | 100.0 km/h | 99.5 km/h | -0.5 km/h |
| ETRTO Rim Width (J) | 6.5–8.5J (7.5J) | 7.0–9.0J (8.0J) | 8.0J → 8.5J |
| Inner Strut Clearance | ET45 | ET45 | -10.0 mm |
| Outer Fender Poke | 8.0J | 8.5J | +10.0 mm |
Engineering Fitment & Regulatory Analysis (235/55 R19 → 255/45 R20)
Under ETRTO geometric standards, 235/55 R19 has a section width of 235 mm, a sidewall height of 129.2 mm (5.09"), and an overall rolling diameter of 741.1 mm (29.18"). Moving to 255/45 R20 alters section width by +20 mm, sidewall height by -14.5 mm, and rolling circumference from 2328 mm (429.5 revs/km) to 2317 mm (431.6 revs/km).
Rim Width & Clearance: ETRTO approves 6.5J–8.5J rims (ideal 7.5J) for 235/55 R19, and 7.0J–9.0J rims (ideal 8.0J) for 255/45 R20.Comparing 8.0J ET45 against 8.5J ET45 shifts inner suspension strut clearance by -10.0 mm and outer fender arch position by +10.0 mm. This setup falls within the European ECE-R39 / German StVZO §57 speedometer window (−4.0% to +1.5%) without mandatory speedometer recalibration.