AxleTable

TIRE SIZE COMPARISON · ETRTO GEOMETRY

225/45 R17 vs 215/45 R17

Direct Answer: Switching from 225/45 R17 to 215/45 R17 changes overall diameter by -1.42% (-9.0 mm) and ground clearance by -4.5 mm. At an indicated 100 km/h (60 mph), your actual speed is 98.6 km/h (59.1 mph). Slightly narrower and lighter alternative, reduces circumference by ~1.4%.
Metric225/45 R17215/45 R17Delta
Section Width225 mm215 mm-10 mm
Sidewall Height101.2 mm (3.99")96.8 mm (3.81")-4.5 mm
Overall Diameter634.3 mm (24.97")625.3 mm (24.62")-9.0 mm (-1.42%)
Ground Clearance317.1 mm312.6 mm-4.5 mm
Circumference1993 mm1964 mm-28 mm
Revolutions / km501.8509.1+7.2
Speedo at 100 km/h100.0 km/h98.6 km/h-1.4 km/h
ETRTO Rim Width (J)6.0–8.0J (7.0J)6.0–8.0J (7.0J)7.5J → 7.0J
Inner Strut ClearanceET45ET45+5.0 mm
Outer Fender Poke7.5J7.0J-5.0 mm

Engineering Fitment & Regulatory Analysis (225/45 R17 → 215/45 R17)

Under ETRTO geometric standards, 225/45 R17 has a section width of 225 mm, a sidewall height of 101.2 mm (3.99"), and an overall rolling diameter of 634.3 mm (24.97"). Moving to 215/45 R17 alters section width by -10 mm, sidewall height by -4.5 mm, and rolling circumference from 1993 mm (501.8 revs/km) to 1964 mm (509.1 revs/km).

Rim Width & Clearance: ETRTO approves 6.0J–8.0J rims (ideal 7.0J) for 225/45 R17, and 6.0J–8.0J rims (ideal 7.0J) for 215/45 R17.Comparing 7.5J ET45 against 7.0J ET45 shifts inner suspension strut clearance by +5.0 mm and outer fender arch position by -5.0 mm. This setup falls within the European ECE-R39 / German StVZO §57 speedometer window (−4.0% to +1.5%) without mandatory speedometer recalibration.