AxleTable

TIRE SIZE COMPARISON · ETRTO GEOMETRY

215/55 R17 vs 225/50 R17

Direct Answer: Switching from 215/55 R17 to 225/50 R17 changes overall diameter by -1.72% (-11.5 mm) and ground clearance by -5.8 mm. At an indicated 100 km/h (60 mph), your actual speed is 98.3 km/h (59.0 mph). Wider, slightly lower-profile 17-inch tire with -1.7% smaller diameter.
Metric215/55 R17225/50 R17Delta
Section Width215 mm225 mm+10 mm
Sidewall Height118.3 mm (4.66")112.5 mm (4.43")-5.8 mm
Overall Diameter668.3 mm (26.31")656.8 mm (25.86")-11.5 mm (-1.72%)
Ground Clearance334.1 mm328.4 mm-5.8 mm
Circumference2100 mm2063 mm-36 mm
Revolutions / km476.3484.6+8.3
Speedo at 100 km/h100.0 km/h98.3 km/h-1.7 km/h
ETRTO Rim Width (J)6.0–8.0J (7.0J)6.0–8.0J (7.0J)7.0J → 7.5J
Inner Strut ClearanceET45ET45-5.0 mm
Outer Fender Poke7.0J7.5J+5.0 mm

Engineering Fitment & Regulatory Analysis (215/55 R17 → 225/50 R17)

Under ETRTO geometric standards, 215/55 R17 has a section width of 215 mm, a sidewall height of 118.3 mm (4.66"), and an overall rolling diameter of 668.3 mm (26.31"). Moving to 225/50 R17 alters section width by +10 mm, sidewall height by -5.8 mm, and rolling circumference from 2100 mm (476.3 revs/km) to 2063 mm (484.6 revs/km).

Rim Width & Clearance: ETRTO approves 6.0J–8.0J rims (ideal 7.0J) for 215/55 R17, and 6.0J–8.0J rims (ideal 7.0J) for 225/50 R17.Comparing 7.0J ET45 against 7.5J ET45 shifts inner suspension strut clearance by -5.0 mm and outer fender arch position by +5.0 mm. This setup falls within the European ECE-R39 / German StVZO §57 speedometer window (−4.0% to +1.5%) without mandatory speedometer recalibration.