AxleTable

TIRE SIZE COMPARISON · ETRTO GEOMETRY

225/45 R17 vs 225/50 R17

Direct Answer: Switching from 225/45 R17 to 225/50 R17 changes overall diameter by +3.55% (+22.5 mm) and ground clearance by +11.2 mm. At an indicated 100 km/h (60 mph), your actual speed is 103.5 km/h (62.1 mph). Taller sidewall for pothole protection; exceeds +3% diameter so check speedo & TÜV.
Metric225/45 R17225/50 R17Delta
Section Width225 mm225 mm+0 mm
Sidewall Height101.2 mm (3.99")112.5 mm (4.43")+11.2 mm
Overall Diameter634.3 mm (24.97")656.8 mm (25.86")+22.5 mm (+3.55%)
Ground Clearance317.1 mm328.4 mm+11.2 mm
Circumference1993 mm2063 mm+71 mm
Revolutions / km501.8484.6-17.2
Speedo at 100 km/h100.0 km/h103.5 km/h+3.5 km/h
ETRTO Rim Width (J)6.0–8.0J (7.0J)6.0–8.0J (7.0J)7.5J → 7.5J
Inner Strut ClearanceET45ET45+0.0 mm
Outer Fender Poke7.5J7.5J+0.0 mm

Engineering Fitment & Regulatory Analysis (225/45 R17 → 225/50 R17)

Under ETRTO geometric standards, 225/45 R17 has a section width of 225 mm, a sidewall height of 101.2 mm (3.99"), and an overall rolling diameter of 634.3 mm (24.97"). Moving to 225/50 R17 alters section width by +0 mm, sidewall height by +11.2 mm, and rolling circumference from 1993 mm (501.8 revs/km) to 2063 mm (484.6 revs/km).

Rim Width & Clearance: ETRTO approves 6.0J–8.0J rims (ideal 7.0J) for 225/45 R17, and 6.0J–8.0J rims (ideal 7.0J) for 225/50 R17.Comparing 7.5J ET45 against 7.5J ET45 shifts inner suspension strut clearance by +0.0 mm and outer fender arch position by +0.0 mm. Because diameter change exceeds the standard −4.0% to +1.5% European ECE-R39 / StVZO §57 threshold, speedometer verification and fender clearance inspection are required.