AxleTable

TIRE SIZE COMPARISON · ETRTO GEOMETRY

225/45 R17 vs 225/40 R18

Direct Answer: Switching from 225/45 R17 to 225/40 R18 changes overall diameter by +0.46% (+2.9 mm) and ground clearance by +1.5 mm. At an indicated 100 km/h (60 mph), your actual speed is 100.5 km/h (60.3 mph). Direct +1 inch sport upgrade on Golf GTI, BMW 3 Series, Audi A3/A4.
Metric225/45 R17225/40 R18Delta
Section Width225 mm225 mm+0 mm
Sidewall Height101.2 mm (3.99")90.0 mm (3.54")-11.2 mm
Overall Diameter634.3 mm (24.97")637.2 mm (25.09")+2.9 mm (+0.46%)
Ground Clearance317.1 mm318.6 mm+1.5 mm
Circumference1993 mm2002 mm+9 mm
Revolutions / km501.8499.5-2.3
Speedo at 100 km/h100.0 km/h100.5 km/h+0.5 km/h
ETRTO Rim Width (J)6.0–8.0J (7.0J)6.0–8.0J (7.0J)7.5J → 8.0J
Inner Strut ClearanceET45ET45+0.0 mm
Outer Fender Poke7.5J8.0J+0.0 mm

Engineering Fitment & Regulatory Analysis (225/45 R17 → 225/40 R18)

Under ETRTO geometric standards, 225/45 R17 has a section width of 225 mm, a sidewall height of 101.2 mm (3.99"), and an overall rolling diameter of 634.3 mm (24.97"). Moving to 225/40 R18 alters section width by +0 mm, sidewall height by -11.2 mm, and rolling circumference from 1993 mm (501.8 revs/km) to 2002 mm (499.5 revs/km).

Rim Width & Clearance: ETRTO approves 6.0J–8.0J rims (ideal 7.0J) for 225/45 R17, and 6.0J–8.0J rims (ideal 7.0J) for 225/40 R18.Comparing 7.5J ET45 against 8.0J ET45 shifts inner suspension strut clearance by +0.0 mm and outer fender arch position by +0.0 mm. This setup falls within the European ECE-R39 / German StVZO §57 speedometer window (−4.0% to +1.5%) without mandatory speedometer recalibration.