TIRE SIZE COMPARISON · ETRTO GEOMETRY
225/50 R17 vs 225/45 R18
| Metric | 225/50 R17 | 225/45 R18 | Delta |
|---|---|---|---|
| Section Width | 225 mm | 225 mm | +0 mm |
| Sidewall Height | 112.5 mm (4.43") | 101.2 mm (3.99") | -11.2 mm |
| Overall Diameter | 656.8 mm (25.86") | 659.7 mm (25.97") | +2.9 mm (+0.44%) |
| Ground Clearance | 328.4 mm | 329.9 mm | +1.5 mm |
| Circumference | 2063 mm | 2073 mm | +9 mm |
| Revolutions / km | 484.6 | 482.5 | -2.1 |
| Speedo at 100 km/h | 100.0 km/h | 100.4 km/h | +0.4 km/h |
| ETRTO Rim Width (J) | 6.0–8.0J (7.0J) | 6.0–8.0J (7.0J) | 7.5J → 7.5J |
| Inner Strut Clearance | ET38 | ET38 | +0.0 mm |
| Outer Fender Poke | 7.5J | 7.5J | +0.0 mm |
Engineering Fitment & Regulatory Analysis (225/50 R17 → 225/45 R18)
Under ETRTO geometric standards, 225/50 R17 has a section width of 225 mm, a sidewall height of 112.5 mm (4.43"), and an overall rolling diameter of 656.8 mm (25.86"). Moving to 225/45 R18 alters section width by +0 mm, sidewall height by -11.2 mm, and rolling circumference from 2063 mm (484.6 revs/km) to 2073 mm (482.5 revs/km).
Rim Width & Clearance: ETRTO approves 6.0J–8.0J rims (ideal 7.0J) for 225/50 R17, and 6.0J–8.0J rims (ideal 7.0J) for 225/45 R18.Comparing 7.5J ET38 against 7.5J ET38 shifts inner suspension strut clearance by +0.0 mm and outer fender arch position by +0.0 mm. This setup falls within the European ECE-R39 / German StVZO §57 speedometer window (−4.0% to +1.5%) without mandatory speedometer recalibration.