TIRE SIZE COMPARISON · ETRTO GEOMETRY
225/45 R17 vs 235/45 R17
| Metric | 225/45 R17 | 235/45 R17 | Delta |
|---|---|---|---|
| Section Width | 225 mm | 235 mm | +10 mm |
| Sidewall Height | 101.2 mm (3.99") | 105.8 mm (4.16") | +4.5 mm |
| Overall Diameter | 634.3 mm (24.97") | 643.3 mm (25.33") | +9.0 mm (+1.42%) |
| Ground Clearance | 317.1 mm | 321.6 mm | +4.5 mm |
| Circumference | 1993 mm | 2021 mm | +28 mm |
| Revolutions / km | 501.8 | 494.8 | -7.0 |
| Speedo at 100 km/h | 100.0 km/h | 101.4 km/h | +1.4 km/h |
| ETRTO Rim Width (J) | 6.0–8.0J (7.0J) | 6.5–8.5J (7.5J) | 7.5J → 8.0J |
| Inner Strut Clearance | ET45 | ET45 | -5.0 mm |
| Outer Fender Poke | 7.5J | 8.0J | +5.0 mm |
Engineering Fitment & Regulatory Analysis (225/45 R17 → 235/45 R17)
Under ETRTO geometric standards, 225/45 R17 has a section width of 225 mm, a sidewall height of 101.2 mm (3.99"), and an overall rolling diameter of 634.3 mm (24.97"). Moving to 235/45 R17 alters section width by +10 mm, sidewall height by +4.5 mm, and rolling circumference from 1993 mm (501.8 revs/km) to 2021 mm (494.8 revs/km).
Rim Width & Clearance: ETRTO approves 6.0J–8.0J rims (ideal 7.0J) for 225/45 R17, and 6.5J–8.5J rims (ideal 7.5J) for 235/45 R17.Comparing 7.5J ET45 against 8.0J ET45 shifts inner suspension strut clearance by -5.0 mm and outer fender arch position by +5.0 mm. This setup falls within the European ECE-R39 / German StVZO §57 speedometer window (−4.0% to +1.5%) without mandatory speedometer recalibration.