TIRE SIZE COMPARISON · ETRTO GEOMETRY
225/65 R17 vs 225/60 R17
| Metric | 225/65 R17 | 225/60 R17 | Delta |
|---|---|---|---|
| Section Width | 225 mm | 225 mm | +0 mm |
| Sidewall Height | 146.2 mm (5.76") | 135.0 mm (5.31") | -11.2 mm |
| Overall Diameter | 724.3 mm (28.52") | 701.8 mm (27.63") | -22.5 mm (-3.11%) |
| Ground Clearance | 362.1 mm | 350.9 mm | -11.2 mm |
| Circumference | 2275 mm | 2205 mm | -71 mm |
| Revolutions / km | 439.5 | 453.6 | +14.1 |
| Speedo at 100 km/h | 100.0 km/h | 96.9 km/h | -3.1 km/h |
| ETRTO Rim Width (J) | 6.0–8.0J (7.0J) | 6.0–8.0J (7.0J) | 7.0J → 7.0J |
| Inner Strut Clearance | ET35 | ET35 | +0.0 mm |
| Outer Fender Poke | 7.0J | 7.0J | +0.0 mm |
Engineering Fitment & Regulatory Analysis (225/65 R17 → 225/60 R17)
Under ETRTO geometric standards, 225/65 R17 has a section width of 225 mm, a sidewall height of 146.2 mm (5.76"), and an overall rolling diameter of 724.3 mm (28.52"). Moving to 225/60 R17 alters section width by +0 mm, sidewall height by -11.2 mm, and rolling circumference from 2275 mm (439.5 revs/km) to 2205 mm (453.6 revs/km).
Rim Width & Clearance: ETRTO approves 6.0J–8.0J rims (ideal 7.0J) for 225/65 R17, and 6.0J–8.0J rims (ideal 7.0J) for 225/60 R17.Comparing 7.0J ET35 against 7.0J ET35 shifts inner suspension strut clearance by +0.0 mm and outer fender arch position by +0.0 mm. This setup falls within the European ECE-R39 / German StVZO §57 speedometer window (−4.0% to +1.5%) without mandatory speedometer recalibration.