AxleTable

TIRE SIZE COMPARISON · ETRTO GEOMETRY

225/65 R17 vs 235/60 R17

Direct Answer: Switching from 225/65 R17 to 235/60 R17 changes overall diameter by -1.45% (-10.5 mm) and ground clearance by -5.2 mm. At an indicated 100 km/h (60 mph), your actual speed is 98.6 km/h (59.1 mph). Wider crossover fitment with -1.4% diameter change for sharper steering response.
Metric225/65 R17235/60 R17Delta
Section Width225 mm235 mm+10 mm
Sidewall Height146.2 mm (5.76")141.0 mm (5.55")-5.2 mm
Overall Diameter724.3 mm (28.52")713.8 mm (28.10")-10.5 mm (-1.45%)
Ground Clearance362.1 mm356.9 mm-5.2 mm
Circumference2275 mm2242 mm-33 mm
Revolutions / km439.5445.9+6.5
Speedo at 100 km/h100.0 km/h98.6 km/h-1.4 km/h
ETRTO Rim Width (J)6.0–8.0J (7.0J)6.5–8.5J (7.5J)7.0J → 7.5J
Inner Strut ClearanceET35ET35-5.0 mm
Outer Fender Poke7.0J7.5J+5.0 mm

Engineering Fitment & Regulatory Analysis (225/65 R17 → 235/60 R17)

Under ETRTO geometric standards, 225/65 R17 has a section width of 225 mm, a sidewall height of 146.2 mm (5.76"), and an overall rolling diameter of 724.3 mm (28.52"). Moving to 235/60 R17 alters section width by +10 mm, sidewall height by -5.2 mm, and rolling circumference from 2275 mm (439.5 revs/km) to 2242 mm (445.9 revs/km).

Rim Width & Clearance: ETRTO approves 6.0J–8.0J rims (ideal 7.0J) for 225/65 R17, and 6.5J–8.5J rims (ideal 7.5J) for 235/60 R17.Comparing 7.0J ET35 against 7.5J ET35 shifts inner suspension strut clearance by -5.0 mm and outer fender arch position by +5.0 mm. This setup falls within the European ECE-R39 / German StVZO §57 speedometer window (−4.0% to +1.5%) without mandatory speedometer recalibration.