TIRE SIZE COMPARISON · ETRTO GEOMETRY
225/65 R17 vs 235/65 R17
| Metric | 225/65 R17 | 235/65 R17 | Delta |
|---|---|---|---|
| Section Width | 225 mm | 235 mm | +10 mm |
| Sidewall Height | 146.2 mm (5.76") | 152.8 mm (6.01") | +6.5 mm |
| Overall Diameter | 724.3 mm (28.52") | 737.3 mm (29.03") | +13.0 mm (+1.79%) |
| Ground Clearance | 362.1 mm | 368.6 mm | +6.5 mm |
| Circumference | 2275 mm | 2316 mm | +41 mm |
| Revolutions / km | 439.5 | 431.7 | -7.7 |
| Speedo at 100 km/h | 100.0 km/h | 101.8 km/h | +1.8 km/h |
| ETRTO Rim Width (J) | 6.0–8.0J (7.0J) | 6.5–8.5J (7.5J) | 7.0J → 7.5J |
| Inner Strut Clearance | ET35 | ET35 | -5.0 mm |
| Outer Fender Poke | 7.0J | 7.5J | +5.0 mm |
Engineering Fitment & Regulatory Analysis (225/65 R17 → 235/65 R17)
Under ETRTO geometric standards, 225/65 R17 has a section width of 225 mm, a sidewall height of 146.2 mm (5.76"), and an overall rolling diameter of 724.3 mm (28.52"). Moving to 235/65 R17 alters section width by +10 mm, sidewall height by +6.5 mm, and rolling circumference from 2275 mm (439.5 revs/km) to 2316 mm (431.7 revs/km).
Rim Width & Clearance: ETRTO approves 6.0J–8.0J rims (ideal 7.0J) for 225/65 R17, and 6.5J–8.5J rims (ideal 7.5J) for 235/65 R17.Comparing 7.0J ET35 against 7.5J ET35 shifts inner suspension strut clearance by -5.0 mm and outer fender arch position by +5.0 mm. Because diameter change exceeds the standard −4.0% to +1.5% European ECE-R39 / StVZO §57 threshold, speedometer verification and fender clearance inspection are required.