AxleTable

TIRE SIZE COMPARISON · ETRTO GEOMETRY

225/65 R17 vs 245/65 R17

Direct Answer: Switching from 225/65 R17 to 245/65 R17 changes overall diameter by +3.59% (+26.0 mm) and ground clearance by +13.0 mm. At an indicated 100 km/h (60 mph), your actual speed is 103.6 km/h (62.2 mph). Aggressive +20 mm wider all-terrain setup on RAV4/CR-V; +3.6% diameter requires clearance check.
Metric225/65 R17245/65 R17Delta
Section Width225 mm245 mm+20 mm
Sidewall Height146.2 mm (5.76")159.2 mm (6.27")+13.0 mm
Overall Diameter724.3 mm (28.52")750.3 mm (29.54")+26.0 mm (+3.59%)
Ground Clearance362.1 mm375.1 mm+13.0 mm
Circumference2275 mm2357 mm+82 mm
Revolutions / km439.5424.2-15.2
Speedo at 100 km/h100.0 km/h103.6 km/h+3.6 km/h
ETRTO Rim Width (J)6.0–8.0J (7.0J)6.5–8.5J (7.5J)7.0J → 7.5J
Inner Strut ClearanceET35ET35-10.0 mm
Outer Fender Poke7.0J7.5J+10.0 mm

Engineering Fitment & Regulatory Analysis (225/65 R17 → 245/65 R17)

Under ETRTO geometric standards, 225/65 R17 has a section width of 225 mm, a sidewall height of 146.2 mm (5.76"), and an overall rolling diameter of 724.3 mm (28.52"). Moving to 245/65 R17 alters section width by +20 mm, sidewall height by +13.0 mm, and rolling circumference from 2275 mm (439.5 revs/km) to 2357 mm (424.2 revs/km).

Rim Width & Clearance: ETRTO approves 6.0J–8.0J rims (ideal 7.0J) for 225/65 R17, and 6.5J–8.5J rims (ideal 7.5J) for 245/65 R17.Comparing 7.0J ET35 against 7.5J ET35 shifts inner suspension strut clearance by -10.0 mm and outer fender arch position by +10.0 mm. Because diameter change exceeds the standard −4.0% to +1.5% European ECE-R39 / StVZO §57 threshold, speedometer verification and fender clearance inspection are required.