AxleTable

TIRE SIZE COMPARISON · ETRTO GEOMETRY

265/70 R17 vs 265/65 R17

Direct Answer: Switching from 265/70 R17 to 265/65 R17 changes overall diameter by -3.30% (-26.5 mm) and ground clearance by -13.2 mm. At an indicated 100 km/h (60 mph), your actual speed is 96.7 km/h (58.0 mph). Slightly smaller highway-oriented sizing on 17-inch truck wheels.
Metric265/70 R17265/65 R17Delta
Section Width265 mm265 mm+0 mm
Sidewall Height185.5 mm (7.30")172.2 mm (6.78")-13.2 mm
Overall Diameter802.8 mm (31.61")776.3 mm (30.56")-26.5 mm (-3.30%)
Ground Clearance401.4 mm388.1 mm-13.2 mm
Circumference2522 mm2439 mm-83 mm
Revolutions / km396.5410.0+13.5
Speedo at 100 km/h100.0 km/h96.7 km/h-3.3 km/h
ETRTO Rim Width (J)7.5–9.5J (8.5J)7.5–9.5J (8.5J)7.5J → 7.5J
Inner Strut ClearanceET44ET44+0.0 mm
Outer Fender Poke7.5J7.5J+0.0 mm

Engineering Fitment & Regulatory Analysis (265/70 R17 → 265/65 R17)

Under ETRTO geometric standards, 265/70 R17 has a section width of 265 mm, a sidewall height of 185.5 mm (7.30"), and an overall rolling diameter of 802.8 mm (31.61"). Moving to 265/65 R17 alters section width by +0 mm, sidewall height by -13.2 mm, and rolling circumference from 2522 mm (396.5 revs/km) to 2439 mm (410.0 revs/km).

Rim Width & Clearance: ETRTO approves 7.5J–9.5J rims (ideal 8.5J) for 265/70 R17, and 7.5J–9.5J rims (ideal 8.5J) for 265/65 R17.Comparing 7.5J ET44 against 7.5J ET44 shifts inner suspension strut clearance by +0.0 mm and outer fender arch position by +0.0 mm. This setup falls within the European ECE-R39 / German StVZO §57 speedometer window (−4.0% to +1.5%) without mandatory speedometer recalibration.