AxleTable

TIRE SIZE COMPARISON · ETRTO GEOMETRY

265/70 R17 vs 265/75 R16

Direct Answer: Switching from 265/70 R17 to 265/75 R16 changes overall diameter by +0.14% (+1.1 mm) and ground clearance by +0.6 mm. At an indicated 100 km/h (60 mph), your actual speed is 100.1 km/h (60.1 mph). Equivalent 31.6-inch overall diameter on a 16-inch rim for extra sidewall flex off-road (check brake caliper clearance).
Metric265/70 R17265/75 R16Delta
Section Width265 mm265 mm+0 mm
Sidewall Height185.5 mm (7.30")198.8 mm (7.82")+13.2 mm
Overall Diameter802.8 mm (31.61")803.9 mm (31.65")+1.1 mm (+0.14%)
Ground Clearance401.4 mm401.9 mm+0.6 mm
Circumference2522 mm2526 mm+3 mm
Revolutions / km396.5396.0-0.5
Speedo at 100 km/h100.0 km/h100.1 km/h+0.1 km/h
ETRTO Rim Width (J)7.5–9.5J (8.5J)7.5–9.5J (8.5J)7.5J → 7.5J
Inner Strut ClearanceET44ET30+14.0 mm
Outer Fender Poke7.5J7.5J+14.0 mm

Engineering Fitment & Regulatory Analysis (265/70 R17 → 265/75 R16)

Under ETRTO geometric standards, 265/70 R17 has a section width of 265 mm, a sidewall height of 185.5 mm (7.30"), and an overall rolling diameter of 802.8 mm (31.61"). Moving to 265/75 R16 alters section width by +0 mm, sidewall height by +13.2 mm, and rolling circumference from 2522 mm (396.5 revs/km) to 2526 mm (396.0 revs/km).

Rim Width & Clearance: ETRTO approves 7.5J–9.5J rims (ideal 8.5J) for 265/70 R17, and 7.5J–9.5J rims (ideal 8.5J) for 265/75 R16.Comparing 7.5J ET44 against 7.5J ET30 shifts inner suspension strut clearance by +14.0 mm and outer fender arch position by +14.0 mm. This setup falls within the European ECE-R39 / German StVZO §57 speedometer window (−4.0% to +1.5%) without mandatory speedometer recalibration.