AxleTable

TIRE SIZE COMPARISON · ETRTO GEOMETRY

265/70 R17 vs 275/70 R17

Direct Answer: Switching from 265/70 R17 to 275/70 R17 changes overall diameter by +1.74% (+14.0 mm) and ground clearance by +7.0 mm. At an indicated 100 km/h (60 mph), your actual speed is 101.7 km/h (61.0 mph). Modest +10 mm width and +1.7% height step-up for mid-size and full-size trucks without major lift.
Metric265/70 R17275/70 R17Delta
Section Width265 mm275 mm+10 mm
Sidewall Height185.5 mm (7.30")192.5 mm (7.58")+7.0 mm
Overall Diameter802.8 mm (31.61")816.8 mm (32.16")+14.0 mm (+1.74%)
Ground Clearance401.4 mm408.4 mm+7.0 mm
Circumference2522 mm2566 mm+44 mm
Revolutions / km396.5389.7-6.8
Speedo at 100 km/h100.0 km/h101.7 km/h+1.7 km/h
ETRTO Rim Width (J)7.5–9.5J (8.5J)7.5–9.5J (8.5J)7.5J → 8.0J
Inner Strut ClearanceET44ET35+4.0 mm
Outer Fender Poke7.5J8.0J+14.0 mm

Engineering Fitment & Regulatory Analysis (265/70 R17 → 275/70 R17)

Under ETRTO geometric standards, 265/70 R17 has a section width of 265 mm, a sidewall height of 185.5 mm (7.30"), and an overall rolling diameter of 802.8 mm (31.61"). Moving to 275/70 R17 alters section width by +10 mm, sidewall height by +7.0 mm, and rolling circumference from 2522 mm (396.5 revs/km) to 2566 mm (389.7 revs/km).

Rim Width & Clearance: ETRTO approves 7.5J–9.5J rims (ideal 8.5J) for 265/70 R17, and 7.5J–9.5J rims (ideal 8.5J) for 275/70 R17.Comparing 7.5J ET44 against 8.0J ET35 shifts inner suspension strut clearance by +4.0 mm and outer fender arch position by +14.0 mm. Because diameter change exceeds the standard −4.0% to +1.5% European ECE-R39 / StVZO §57 threshold, speedometer verification and fender clearance inspection are required.