TIRE SIZE COMPARISON · ETRTO GEOMETRY
265/70 R17 vs 285/70 R17
| Metric | 265/70 R17 | 285/70 R17 | Delta |
|---|---|---|---|
| Section Width | 265 mm | 285 mm | +20 mm |
| Sidewall Height | 185.5 mm (7.30") | 199.5 mm (7.85") | +14.0 mm |
| Overall Diameter | 802.8 mm (31.61") | 830.8 mm (32.71") | +28.0 mm (+3.49%) |
| Ground Clearance | 401.4 mm | 415.4 mm | +14.0 mm |
| Circumference | 2522 mm | 2610 mm | +88 mm |
| Revolutions / km | 396.5 | 383.1 | -13.4 |
| Speedo at 100 km/h | 100.0 km/h | 103.5 km/h | +3.5 km/h |
| ETRTO Rim Width (J) | 7.5–9.5J (8.5J) | 8.0–10.0J (9.0J) | 7.5J → 8.5J |
| Inner Strut Clearance | ET44 | ET25 | +9.0 mm |
| Outer Fender Poke | 7.5J | 8.5J | +29.0 mm |
Engineering Fitment & Regulatory Analysis (265/70 R17 → 285/70 R17)
Under ETRTO geometric standards, 265/70 R17 has a section width of 265 mm, a sidewall height of 185.5 mm (7.30"), and an overall rolling diameter of 802.8 mm (31.61"). Moving to 285/70 R17 alters section width by +20 mm, sidewall height by +14.0 mm, and rolling circumference from 2522 mm (396.5 revs/km) to 2610 mm (383.1 revs/km).
Rim Width & Clearance: ETRTO approves 7.5J–9.5J rims (ideal 8.5J) for 265/70 R17, and 8.0J–10.0J rims (ideal 9.0J) for 285/70 R17.Comparing 7.5J ET44 against 8.5J ET25 shifts inner suspension strut clearance by +9.0 mm and outer fender arch position by +29.0 mm. Because diameter change exceeds the standard −4.0% to +1.5% European ECE-R39 / StVZO §57 threshold, speedometer verification and fender clearance inspection are required.